Soft Ferrite сores
EPCOS TDK FERROXCUBE MAGNETICS
Magnetics Powder Cores
Ring cores Thin ring cores E-shaped cores U-shaped cores Stack-mounted cores Round Block Cores Tape-Wound cores
Iron powder cores
General information Ring cores
Magnets and hard ferrites
General information NdFeB (neodymium – iron - boron) AlNiCo ALNICO SmCo (samarium - cobalt) Barium and strontium TDK magnets
Сores made of amorphous and nanocrystalline alloys Wireless charging coils TDK Noise Suppressing Sheets Microwave ferrites and ceramics
Signal Inductors
Epcos chip inductors TDK chip inductors
Power inductors
Epcos inductors TDK inductors
Сhokes
Chokes for power line Data and signal line chokes Choke Coils for PFC Radio frequency (RF) chokes Very high frequency (VHF) chokes
Film Capacitors Aluminum electrolytic capacitors
Ceramic capacitors
Multilayer ceramic chip capacitors Leaded capacitors High voltage capacitors
Trimmer capacitors
Resonators for microwave devices
Coaxial resonators Dielectric resonators
Transformers (TDK & EPCOS)
Transformers for xDSL Current sense transformers Clamp Type Current Sensors Gate-drive transformers Universal transformers
Protection devices
Varistors Arresters PTC thermistors NTC thermistors CeraDiodes EMC filters Clamp filters (ZCAT) for cable
Sensor systems
Pressure sensor PTC temperature measurement sensors NTC temperature measurement sensors
SAW components
SAW-filters
Materials for high-frequency tube welding
ZRS, ZRSH, ZR, ZRH cores Assembly impeders through flow Assembly impeders return flow Fibreglass casing Welding rolls Filter elements Copper induction coil Inserts Inside tube scarfing
Materials for electrical insulation
mordashka
Magnetics Epcos (Siemens Matsushita Components), Germany TDK Ferroxcube
North West Laboratory

Engineering Center SZL and LEPCOS
— General representative of Epcos AG by ferrite in the CIS
— Official distributor and general representative for ferrites of
    TDK Electronics Europe Gmbh in the CIS
— Authorized distributor of Magnetics in Russia, CIS and Baltic countries
— Exclusive distributor of USM in Russia and CIS countries
— Official Distributor Temex Ceramics in Russia and CIS
 


Products » TDK’s Cores and USM’s Ready Made Impeders » Saws and guillotine’s blades for tube cutting »

Saws and guillotine’s blades for tube cutting

HSS-DMO-05 Saws for Low Velocity Tube Cutting

HSS-DMO-05 Saws for Low Velocity Tube Cutting USM Company provides a highest quality of supplied HSS-DMO-05 saws that are produced according to newest technologies ensuring a long life time and a high quality of sawn surface combined with minimum production time.

Used coating types: TIN-TIALN-TICN +5% CO.

Dimensions,
mm		 Maximum Operating Temperature and Form-Number of Teeth
T1,5
Aw		 T2,5
Aw-Bw		 T3
Bw		 T4
Bw		 T4,5
Bw		 T5
Bw		 T5,5
Bw		 T6
C		 T7
C		 T8
C		 T9
C		 T10
C		 T12
C		 T14
C		 T14
C		 T18
C		 T20
C
175 × 1.2     180 140   100   90   70              
175 × 1.5     180 140   100   90   70              
175 × 2.0 360 220 180 140   100   90 80 70              
200 × 1.2     200 160   130   100   80   60          
200 × 1.5     200 160   130   100   80   60          
200 × 1.8     200 160   130   100   80   60          
200 × 2.0     200 160   130   100   80   60          
200 × 2.5     200 160   130   100   80   60          
210 × 2.0     210 160   130   110   80              
225 × 1.2     220 180   140   120   90 80            
225 × 1.5     220 180   140   120   90 80            
225 × 1.6     220 180   140   120   90 80            
225 × 2.0     220 180   140   120   90 80            
225 × 2.5     220 180   140   120   90 80            
250 × 1.2     250 200   160   128 110 100   80 60        
250 × 1.5     250 200   160   128 110 100   80 60        
250 × 1.6     250 200   160   128 110 100   80 60        
250 × 2.0 500 320 250 200 180 160 140 128 110 100   80 60        
250 × 2.5     250 200   160   128   100   80 60        
250 × 3.0     250 200   160   128   100   80 60        
275 × 1.6     280 220   180   140 120 110   90          
275 × 2.0     280 220 200 180 160 140 120 110   90          
275 × 2.5     280 220 200 180 160 140 120 110   90          
275 × 3.0     280 220   180   140 120 110   90          
300 × 1.6     300 220   180   160 140 120   90 80        
300 × 2.0     300 220   180   160 140 120   90 80        
300 × 2.5     300 220   180   160 140 120   90 80        
300 × 3.0     300 220   180   160 140 120   90 80        
315 × 2.0     300 240   200   160 140 120   100 80 70      
315 × 2.5     300 240   200   160 140 120   100 80 70      
315 × 3.0     300 240   200   160 140 120   100 80 70      
325 × 2.5     320 250   200   170   128   100 80        
325 × 3.0     320 250   200   170   128   100 80        
350 × 2.0     350 280   220   180 160 140 120 110 90 80      
350 × 2.5     350 280   220   180 160 140 120 110 90 80      
350 × 3.0     350 280   220   180 160 140 120 110 90 80      
350 × 3.5     350 280   220   180 160 140 120 110 90 80      
370 × 2.5       280   220   190 160 140 120 110 90 80 70    
370 × 3.0       280   220   190 160 140 120 110 90 80 70    
370 × 3.5       280   220   190 160 140 120 110 90 80 70    
400 × 2.5       320   240   200 180 160   120 100 90   70 60
400 × 3.0       320   240   200 180 160   120 100 90   70 60
400 × 3.5       320   240   200 180 160   120 100 90   70 60
400 × 4.0       320   240   200 180 160   120 100 90   70 60
425 × 3.0       320   260   220   160   130 110 90   70 60
425 × 3.5       320   260   220   160   130 110 90   70 60
425 × 4.0       320   260   220   160   130 110 90   70 60
450 × 3.0       350   280   230   180   140 120 100 90 80 70
450 × 3.5       350   280   230   180   140 120 100 90 80 70
450 × 4.0       350   280   230   180   140 120 100 90 80 70
500 × 3.0           310   260   200   160 130 110 100 90 80
500 × 3.5           310   260   200   160 130 110 100 90 80
500 × 4.0           310   260   200   160 130 110 100 90 80
525 × 4.0           330   270   200   160 130 110 10 90 80
550 × 4.0           340   290   220   170 140 120 110 90 80
550 × 5.0           340   290   220   170 140 120 110 90 80
570 × 4.0           360   300   220   180 150 120 110 100 90
570 × 5.0           360   300   220   180 150 120 110 100 90
600 × 4.0           380   320   240   190 160 130 120 100 90
600 × 5.0           380   320   240   190 160 130 120 100 90

Bimetallic Blades of M42 Band Saws

Bimetallic Blades of M42 Band Saws To protect teeth, blades are supplied in protective plastic.

Applied coatings: TIN.

Type Widht Thickness Teeth
MX PRATICA 25.40 mm 0.89 mm 4/6 - 5/8 - 6/10 - 8/12
M42 TECNICA 6.33 mm 0.89 mm 6 - 10 - 14
  9.52 mm 0.89 mm 6 - 10 - 14
  12.70 mm 0.89 mm 3 - 4 - 6 - 10 - 14 - 8/12
  19.05 mm 0.89 mm 3 - 4 - 6 - 10 - 14 - 4/6 - 5/8 - 6/10 - 8/12(*) - 10/14
  27.00 mm 0.89 mm 2(*) - 3 - 4 - 6 - 8 - 1 - 14 - 2/3 - 3/4 - 4/6 - 5/8 - 6/10 - 8/12 - 10/14
  34.00 mm 1.07 mm 2 - 3 - 4 - 6 - 14(*) - 2/3 - 3/4 - 4/6 - 5/8 - 6/10
  41.00 mm 1.27 mm 2 - 3 - 4 - 6 - 2/3 - 3/4 - 4/6
M42 SPECIFICA 27.00 mm 0.89 mm 3/4s - 4/6s - 4/6 n
  34.00 mm 1.07 mm 3/4s - 4/6s 4/6n
  41.00 mm 1.27 mm 3/4s - 4/6s - 4/6n

Guillotine’s Blades

USM Company produces guillotine’s blades on design of Customer. Specially developed coating reduces a wear of blades and increases their operation time.

Guillotine’s Blades

Equipment for Sharpening Teeth of Saws

USM Company supplies equipment for sharpening teeth of HSS, Cr-W-Mo and Cr-V saws and also produces abrasive disks for Customer’s concrete specifics.

Equipment for Sharpening Teeth of Saws

 
NORTH-WESTERN LABORATORY: NEWS
   
 
Contacts
196084, Russia, St. Petersburg
Varshavskaya str. 5A.
Paper mail: 196128, Russia, St. Petersburg, p.o. box 63
All contacts
Ferrite cores:
+7 (812) 369-51-80; 740-53-05;
               369-11-54; 740-53-06;
Transformers manufacturing:
+7 (812) 369-89-20; 369-38-97;


  


«North West Laboratory» © 1999—2024

Development & support — Marina Kutuzova