At present time, rings being produced on the base of iron powder are applied in maufacturing of inductors and transformers widely used in switched mode power supply and apparatus operating in High-Frequency band.
Most of companies developing modern soft ferrites include iron powder cores in their nomenclature due to low production cost, high saturation induction and ability to operate in terms of hard exploition. For instance,Ferroxcube manufactures ring cores on the base of iron powder material (2P).
- low magnetic permeability
- distributed air gap
- high saturation induction (up to 1500 mT)
Material | μe при 25°С | Bsat, мТл при 25°С (3000 А/м) |
T nom. max, °С |
Application | Documentation |
2P40 | 40 | 950 | 140 | EMI-suppression, output chokes and others |
Documentation |
2P50 | 50 | 1000 | 140 | ||
2P65 | 65 | 1150 | 140 | ||
2P80 | 80 | 1400 | 140 | ||
2P90 | 90 | 1600 | 140 |
The main size types of 2P (Iron Powder) cores produced by Ferroxcube are listed in the table:
Ordering code | Material | Sizes after coating | Electromagnetic parameters | |||
OD max [mm] |
ID min [mm] |
HT max [mm] |
AL (nH) |
μe | ||
TN7.5/4.1/3-2P80 | 2P80 | 7.5 | 4.1 | 3 | 28 | 80 |
TN7.5/4.1/3-2P80 | 2P90 | 7.5 | 4.1 | 3 | 30 | 90 |
TN12/8/4.4-2P80 | 2P80 | 12 | 8 | 4.4 | 31 | 80 |
TN12/8/4.4-2P80 | 2P90 | 12 | 8 | 4.4 | 33 | 90 |
TN17/9.8/4.4-2P40 | 2P40 | 17 | 9.8 | 4.4 | 20 | 40 |
TN17/9.8/4.4-2P80 | 2P80 | 17 | 9.8 | 4.4 | 40 | 80 |
TN17/9.8/4.4-2P80 | 2P80 | 17 | 9.8 | 4.4 | 40 | 80 |
TN20/13/6-2P80 | 2P80 | 20 | 13 | 6 | 41 | 80 |
TN20/13/6-2P90 | 2P90 | 20 | 13 | 6 | 44 | 90 |
TN24/15/7.5-2P80 | 2P80 | 24 | 15 | 7.5 | 57 | 80 |
TN27/15/11-2P40 | 2P40 | 27 | 15 | 11 | 49 | 40 |
TN27/15/11-2P80 | 2P80 | 27 | 15 | 11 | 94 | 80 |
TN27/15/11-2P90 | 2P90 | 27 | 15 | 11 | 105 | 90 |
TN33/20/11-2P40 | 2P40 | 33 | 20 | 11 | 41 | 40 |
TN33/20/11-2P50 | 2P50 | 33 | 20 | 11 | 51 | 50 |
TN33/20/11-2P65 | 2P65 | 33 | 20 | 11 | 67 | 65 |
TN33/20/11-2P80 | 2P80 | 33 | 20 | 11 | 82 | 80 |
TN33/20/11-2P90 | 2P90 | 33 | 20 | 11 | 87 | 90 |
To check the presence of the cores in stock
The structure of the ordering code
T - ring core
N - type of isolation coating
33/20/11 -core sizes
2P90 - material